Power Flushing in Kirkcaldy & Fife
Clear the sludge so your radiators heat fully and your boiler lasts longer.
Power Flushing in Kirkcaldy and across Fife
Years of black sludge building up in a system means cold radiators, a struggling boiler and higher bills. A power flush clears it all out, gets your heating working as it should, and protects the boiler you've just paid for. We carry it out across Kirkcaldy and Fife.
What's included
- Full central heating power flush
- Cold-at-the-bottom radiators brought back to life
- Inhibitor added to stop it coming back
- Often sorts a noisy, sludgy boiler
Signs your heating needs a power flush
The classic tell-tale is a radiator that's hot at the top but cold along the bottom. Add in cloudy or black water when you bleed a rad, a boiler that gurgles or kettles, and slow warm-up times, and the system is almost certainly full of sludge.
Most installers won't fit a new boiler onto a dirty system without flushing it first, and many warranties depend on it. Doing it properly protects the money you're about to spend on a boiler.
What a power flush involves
We connect a pumping unit to the system and push a cleaning solution through every radiator at high flow to shift the rust and sludge, then drain it out until the water runs clear. Finished off with a corrosion inhibitor, it keeps the system clean for years.
Most homes take a day depending on the number of radiators. We'll give you a fixed price up front once we know the size of the system.
We've been doing this for 14years, for homes and businesses alike. You get a Gas Safe registered, fully insured team that shows up when promised, keeps the mess down, and gives you the price before the work starts. Quotes are always free, and we're rated 5 stars on Google and Checkatrade.
Power Flushing questions, answered
The things people ask us most. Can't see what you're after? Give us a call, we're happy to talk it through.
It's a deep clean of your central heating. We pump a cleaning solution through the system at high flow to shift the rust and black sludge, then drain it out until the water runs clear and add an inhibitor to protect it.
The usual signs are radiators that are hot at the top but cold at the bottom, cloudy or black water when you bleed them, slow warm-up, and a boiler that bangs or kettles.
Most homes take a day, depending on how many radiators there are and how dirty the system is. We'll give you a fixed price once we know the size of the system.
If the cold spots are caused by sludge sitting in the bottom of the radiators, then yes, a flush usually brings them back to life. We'll check it's sludge and not a balancing or air problem first.
In most cases, yes. Fitting a new boiler onto a dirty system pushes old sludge through it from day one, and many manufacturer warranties expect the system to be cleaned. It protects the money you're spending.
It depends mainly on the number of radiators. We give you a fixed price up front, with no surprises once we're there.
A flush is usually far cheaper than replacing radiators and often gets the same result. If a radiator is genuinely past saving we'll tell you, but most just need the sludge cleared.
It's a corrosion inhibitor that stops rust and sludge building back up, so the benefit of the flush lasts for years. We always add it as part of the job.
Often, yes. A clean system heats up faster and the boiler doesn't have to work as hard, so you're not paying to push heat through sludge.
Kirkcaldy, Glenrothes, Leven, Dunfermline and the rest of Fife, plus Edinburgh and the Lothians.
Other things we sort
Tell us what's wrong and we'll give you a price
Free quote, no pressure, no call-out games. Ring us, drop a WhatsApp, or send a message and we'll get back to you.